Multitech MTD-H5 User Manual page 14

AT+OMADMCEN=<onoff>
AT#OMADMCEN?
AT+OMADMCEN=?
AT+OMADM=(onoff)
AT+OMADM=?
AT+PRL=<onoff>
AT+PRL=?
AT+FUMO=
AT+FUMO=?
AT#HFA
AT#HFACANCEL
AT#SPRTN=xxxxxx
AT#DCCANCEL
AT#PRLCANCEL
AT$PRL?
AT#FUMOCANCEL
14
Set OMA-DM Client feature Disable=0, Enable=1
Query the current OMA-DM client status
Query OMA-DM available values
Set OMA-DM Client Initiated Device Configuration
Disable=0, Enable=1, Initiate=2
(Many OMA commands will result in error if
OMADMCEN=0 is set)
Query OMA-DM Client Initiated Device setting
Set OMA-DM CIPRL Session
Disable=0, Enable=1, Initiate=2
Query OMA-DM CIPRL Session setting
Set OMA-DM FUMO enable parameter
Disable=0, Enable=1, Initiate=2
Query OMA-DM FUMO parameter
Initiate Sprint Hands Free Activation (HFA)
Cancel Sprint Hands Free Activation (HFA) DM
Session
HFA Reset (after device reboot HFA will occur)
xxxxxx= SPC or MSL (currently last 6 digits MEID)
Cancel Device Configuration (DC) Session
Cancel Preferred Roaming List (PRL) Session
Query Preferred Roaming List (PRL) ID #
Cancel Firmware Update Management Object
(FUMO) session.
QuickCarrier USB-D MTD-H5 and MTD-EV3