Software Installation; Windows 3.1 Or; Windows 95 - Smart Technologies Smart Board Installation Instructions Manual

• Windows 3.1 or 3.11, Windows 95, or Windows NT™ 3.51 or 4.0
•
4 MB of free hard disk space for complete (SMART Board) install
• an available serial port
Macintosh System Requirements
•
a 68030 or greater Macintosh or a Power Macintosh
•
4 MB of memory required; 8 MB of memory recommended
®
•
System 7
•
4 MB of free hard disk space for complete (SMART Board) install
•
An available modem or printer port

Software Installation

Install the SMART Board Software disks directly onto the hard drive of
your computer. SMART Board Software disks contain SMART Notebook,
the SMART Board driver and SMART Aware (Windows only). These
programs can also be downloaded individually from our Web site at
www.smarttech.com.
Windows 95/ Windows NT 4.0 Installation
1. Close all applications.
2. Insert the SMART Board Software disk into drive A.
3. From the desktop, click on Start, Run.
4. Type A:\Setup
5. Select OK.
6. Follow the remaining installation instructions as they appear on
your screen.
Windows 3.1/3.11 or Windows NT 3.51 Installation
1. Start Windows.
2. Close all applications except Program Manager.
3. Insert the SMART Board Software disk into drive A.
®
SMART Board Installation Guide 23