Index - Smart Technologies Smart Board Installation Instructions Manual

Index

A
Adjusting the projected image, 20
Attaching the Pen Tray brackets to
the Pen Tray, 4
Attaching the Pen Tray to the
Whiteboard, 4
Attaching the Wall Bracket, 9
Attaching the wall bracket to the
wall, 11
C
Configuring the SMART Board, 25
Connecting the MOD4 cable to the
Pen Tray, 7
Connecting the MOD4 cable to the
whiteboard, 5
Connecting the Pen Tray to the
computer (Macintosh), 16
Connecting the Pen Tray to the
computer (Windows), 15
Connecting the Pen Tray to the
Computer and Power Source, 14
Connecting the Pen Tray to the
power supply, 17
Constant contact, 14
Customer Support, 29
D
Drywall anchors, 8, 10, 11, 14
F
Figures
Connecting the MOD4 Cable to
the Pen Tray, 8
Connecting the MOD6 Cable to
the Pen Tray, 16
Hardware Required for Final Pen
Tray Connections, 15
Inserting the DC connector into
the Pen Tray socket, 17
Inserting the Macintosh Cable
into the Printer or Modem Port
Socket, 17
Inserting the Mini RJ11
Connector into the
Whiteboard, 6
Mini RJ11 Connector in Insertion
Position, 5
MOD4 cable with mini RJ11 4-
wire connector, 4
Pen Tray and Mounting Brackets,
5
SMART Board on its Side (Rear
View), 7
SMART Board with Wall
Anchors, 13
Whiteboard Bracket Sliding into
Wall Bracket, 10
Finding and Marking a Suitable
Location, 8
Fine orientation, 27
G
Glossary, 31
I
Installing SMART Board Software,
22
Installing the projector, 18
M
Marking a SMART Board (with
projection) position, 19
Marking the SMART Board location
on the wall, 9
Matching computer resolution to
projector resolution, 19
Mini RJ11 connector, 5, 6, 14
SMART Board Installation Guide 33