Smart Technologies Smart Board Installation Instructions Manual page 28

24
4. Select File from the Run menu.
5. Type A:\Setup.
6. Select OK.
7. Follow the remaining installation instructions as they appear on
your screen.
NOTE for Users of Windows 3.x: You may need to install the Windows
32-bit extensions, Win32s, before installing SMART Notebook. You will
be instructed to do so if SMART Notebook fails to detect Win32s on your
system during installation.
Macintosh Installation
Switch on your Macintosh computer and install the SMART Board
Software disk as follows:
1. Insert the SMART Installation disk into your floppy drive.
2. Double-click the SMART Installer icon.
The SMART Installer window appears.
3. Click the Continue button to proceed with the installation.
4. You must now decide if you want a Normal Install or a Custom
Install. The Normal installation includes both SMART Notebook
and the SMART Board driver programs.
Click the Install button to install both the SMART Notebook and
SMART Board driver programs.
Click the Custom button to install either SMART Notebook or
SMART Board driver.
5. If you chose the Custom Install, select which of the two programs
you want to install.
6. Follow the on-screen installation instructions to select a
destination folder for the SMART Board Software.
SMART Board Installation Guide