Horn Switch - Victory Motorcycles Vision Tour 2013 Owner's Manual

Headlamp Switch (High/Low)
The headlamp switch is located on the left handlebar. Use
the switch to toggle the headlamp to high beam or low
beam. The key must be in the ON or ACC position.
Tip: To turn the headlamp on, turn the ignition key to ON and
tap or press the start switch.
• Press the top of the switch to activate high beam.
• Press the bottom of the switch to activate low beam.

Horn Switch

The horn switch is located on the left handlebar. Press the
horn switch to sound the horn. The key must be in the
ON or ACC position.
Windshield Adjustment Switch
The motorized windshield adjustment switch (if
equipped) is located on the left handlebar. Use the
switch to change the height and angle of the wind-
shield. The key must be in the ON or ACC position.
Tip: Do not continuously cycle the windshield switch more
than once in a 60-second period.
• Press the top of the switch to raise the windshield.
• Press the bottom of the switch to lower the wind-
shield.
For models not equipped with this feature, use the
manual windshield adjustment procedure. See page
35.
Instruments, Features and Controls
High
Beam
Low
Beam
Horn Switch
Raise
Windshield
Lower
Windshield
29