Video And Audio - Insignia NS-32D312NA15 User Manual

NS-32D312NA15 Insignia 32" LED TV

Video and audio

Problem Solution
Picture does not
• Press ASPECT to change the
fill the screen.
There are black
bars around the
picture.
No picture (screen
• Press
is not lit) and no
sound.
• Make sure that the Audio Only
• Make sure that the video cables
• Adjust the contrast and
• Make sure that the power cord
• Press INPUT and make sure that
• Try another channel. The station
• Make sure that the incoming
• Make sure that the antenna or
• Check the closed caption
aspect ratio. See the "Aspect
Ratio" option in "Adjusting the
TV picture" on page 52.
on the TV or the
remote control.
option is set to Off. See "Playing
TV audio only" on page 56.
are connected correctly and
securely to your TV.
brightness. See "Adjusting the
TV picture" on page 52.
is plugged into a working
outlet.
the correct video input source is
selected. See "Selecting the
video input source" on page 40.
may be experiencing problems.
signal is compatible.
cable TV is connected correctly
and securely. See "Connecting a
cable or satellite box" on
page 13 or "Connecting an
antenna or cable TV (no box)"
on page 18.
settings. Some TEXT modes can
block the screen. See "Using
closed captioning" on page 65.
www.insigniaproducts.com
Problem Solution
Dark, poor, or no
• Try another channel. The station
picture (screen is
may be experiencing problems.
lit), but sound is
• Make sure that the antenna or
good.
cable TV is connected correctly
and securely. See
cable or satellite
page
antenna or cable TV (no
on page 18.
• Adjust the brightness. See
"Adjusting the TV
page 52.
• Press PICTURE to change to a
different picture mode. See
"Adjusting the TV
page 52.
• If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
"Checking the digital signal
strength" on page 60.
• If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
• Make sure that the video cables
are connected correctly and
securely to your TV.
• The video cable(s) you are using
may be bad. Try a new set.
• Try another channel. The station
may be experiencing problems.
No color, dark
• Try another channel. The station
picture, or color is
may be experiencing problems.
not correct.
• Adjust the color settings. See
"Adjusting the TV
page 52.
• Make sure that the video cables
are connected correctly and
securely to your TV.
• Make sure that the antenna or
cable TV is connected correctly
and securely. See
cable or satellite
page
antenna or cable TV (no
on page 18.
• If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
"Checking the digital signal
strength" on page 60.
• If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
"Connecting a
box" on
13 or "Connecting an
box)"
picture" on
picture" on
picture" on
"Connecting a
box" on
13 or "Connecting an
box)"
73