Inlink (Cec-Compatible) Device - Insignia NS-32D312NA15 User Manual

NS-32D312NA15 Insignia 32" LED TV

INlink (CEC-compatible) device

Problem Solution
My TV is not
• Make sure that the HDMI cable
displaying the
video from the
connected CEC
• Make sure that the device is
device.
• Make sure that the device is a
• Press INPUT and make sure that
• Make sure that the INlink
• Try adjusting the TV picture. See
• If the device is not an Insignia
is connected securely to your
TV and the device.
connected to your TV with an
HDMI cable.
CEC device. See the
documentation that came with
the device for more
information.
the correct video input source is
selected. See "Selecting the
video input source" on page 40.
feature is turned on. See
"Turning INlink on or off" on
page 45.
"Adjusting the TV picture" on
page 52.
device, it may not be
compatible with your TV.
www.insigniaproducts.com
Problem Solution
My TV is not
• Make sure that the HDMI cable
playing the
is connected securely to your
audio from the
TV and the device.
connected CEC
• Make sure that the device is
device.
connected to your TV with an
HDMI cable.
• Make sure that the device is a
CEC device. See the
documentation that came with
the device.
• Make sure that the TV volume is
turned up and not muted.
• Try adjusting the TV sound. See
"Adjusting sound
page 55.
• Make sure that the TV speakers
are turned on and not muted.
See
on page 55.
• Make sure that the INlink
feature is turned on. See
"Turning INlink on or
page 45.
• If you have connected an HDMI
CEC audio receiver, adjust the
volume on the receiver. When
your TV detects an audio
receiver, the TV speakers turn
off and sound plays through
receiver speakers only.
• If the device is not an Insignia
device, it may not be
compatible with your TV.
• If you are using a home theater
system, sound bar, or external
speaker system, make sure that
it is turned on and is not muted.
• If you are using a home theater
system, sound bar, or external
speaker system, make sure that
you have selected the correct
output mode.
• If you are using a home theater
system, sound bar, or external
speaker system and have
connected with a digital optical
cable, go to the Audio menu,
highlight Digital Audio
Format/Audio Delay, then
press ENTER. Set the Audio
Format option to PCM. See the
Digital Audio Format/Audio
Delay option in
sound
settings" on
"Adjusting sound settings"
off" on
"Adjusting
settings" on page 55.
79