Connecting A Dvd Or Blu-Ray Player; Hdmi (Best) - Insignia NS-32D312NA15 User Manual

NS-32D312NA15 Insignia 32" LED TV

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect a DVD or Blu-ray player using:

• HDMI (best)

• Component video (better)
• AV (composite video) (good)
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power adapter is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on
the DVD or Blu-ray player.
3 Plug your TV's power adapter into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
DVD or Blu-ray
player
www.insigniaproducts.com
"What connection should I
HDMI cable
use?" on page 12.
Side of TV
19