Customizing Tv Settings; Restoring Settings To The Defaults - Insignia NS-32D312NA15 User Manual

9 When the update is complete, unplug the USB
flash drive, then press ENTER. Your TV turns off
then on to complete the update.
10 If the channel list has been deleted, you need to
scan for channels. For more information, see
"Automatically scanning for
Note
• If you see a message that says the
firmware file is incorrect, make sure
that you have downloaded the correct
file for your model.
• If you see a message that says the
update failed or the TV screen is blank
and the power LED is blinking red
then blue, turn off your TV, turn it back
on, then run the upgrade again.

Customizing TV settings

If you did not complete the customization part of the
Easy Setup wizard the first time you turned on your TV,
you can run the wizard again to customize settings.
When you run the Easy Setup wizard, your TV will not
reset any changes you made on the Picture, Audio,
Channels, or Settings menu. The wizard will scan for
channels and replace the channel information stored
on your TV.
1 Press MENU.
2 Press or to highlight HELP, then press
ENTER.
3 Press or to highlight Customize my TV, then
press ENTER or . A message asks if you want to
run the Easy Setup wizard.
4 Press or to select OK (to reset) or Cancel (to
not reset), then press ENTER.
If you select OK, your TV turns off, then turns on
again. The Easy Setup wizard opens. Go through
the Easy Setup wizard. For more information, see
"Turning on your TV for the first
OR
If you select Cancel or press MENU, your TV
returns to the Help menu without making any
changes. If you press EXIT, the on-screen menu
closes without making any changes.
72
channels" on page 57.
or
time" on page 38.
www.insigniaproducts.com

Restoring settings to the defaults

When you restore default settings, all the settings you
have customized (except parental controls) are reset.
1 Press MENU.
2 Press or to highlight HELP, then press
ENTER.
3 Press or to highlight Reset to Default, then
press ENTER or .
4 Press or to select OK (to reset) or Cancel (to
not reset), then press ENTER.
If you select OK, your TV turns off, then turns on
again. Go through the Easy Setup wizard. For more
information, see
time" on page 38.
OR
If you select Cancel or press MENU, your TV
returns to the Help menu without making any
changes.
OR
If you press EXIT, the on-screen menu closes
without making any changes.
Insignia 32" LED TV
"Turning on your TV for the first
or