Coaxial (Good) - Insignia NS-32D312NA15 User Manual

NS-32D312NA15 Insignia 32" LED TV

Coaxial (good)

On your TV
Coaxial cable
connector
ANT/CABLE IN
jack
1 Make sure that your TV's power adapter is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV's power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight TV, then press ENTER.
7 If you cannot tune to channels you know exist, scan for channels. See
page 57.
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power adapter or other cables.
www.insigniaproducts.com
Back of TV
"Automatically scanning for
Cable or
satellite box
Coaxial cable
wall jack
Cable
channels" on
17