Setting The Power On Picture Mode; Adjusting The Computer Image - Insignia NS-32D312NA15 User Manual

Setting the power on picture mode

You can set the picture mode your TV uses when you
turn it on.
1 Press MENU.
2 Press or to highlight HELP, then press
ENTER.
3 Press or to highlight Power on in Vivid
Mode, then press ENTER or .
4 Press or to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the picture
mode it was in before you turned it off ), then press
ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
54

Adjusting the computer image

When you connect a computer to your TV using the
VGA jack, you may need to adjust the computer
image to improve the quality.
or
1 Make sure that your TV is in VGA mode. For more
2 Press MENU.
3 Press
4 Press
5 Press
6 Press
7 Press MENU to return to the previous menu, or
www.insigniaproducts.com
Note
The Computer Settings option is only
available when a computer is connected
to the VGA jack on the back of your TV.
information, see "Selecting the video input
source" on page 40.
or to highlight SETTINGS, then press
or ENTER.
or to highlight Computer Settings,
then press ENTER.
or to highlight an option, then press
ENTER or to access the option. You can select:
• Auto Adjust—Automatically adjusts the image
settings such as position and phase.
• H. Position—Moves the image right or left.
• V. Position—Moves the image up or down.
• Clock—Minimizes vertical stripes in the screen
image.
• Phase—Minimized horizontal lines in the screen
image.
• Reset Computer Settings—Resets all computer
settings to factory mode.
or to adjust the option, or press
to select a setting.
press EXIT to close the menu.
Insignia 32" LED TV
or