Ipv6 In Ipv4 Tunneling (Stateful) - D-Link Xtreme N L7-N-R2000 User Manual

Section 3 - Configuration
My IPv6 Connection: Select IPv6 in IPv4 Tunnel from the drop-down menu.
IPv6 in IPv4 Tunnel
Enter the settings supplied by your Internet provider (ISP).
Settings:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local
Displays the Router's LAN Link-Local Address.
Address:
Enable
Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration
Select Stateful. Refer to the previous page for Stateful.
Type:
IPv6 Address Range
Enter the start IPv6 Address for the DHCPv6 range for your
Start:
local computers.
IPv6 Address Range
Enter the end IPv6 Address for the DHCPv6 range for your
End:
local computers.
Pv6 Address Lifetime:
Enter the Router Advertisement Lifetime (in minutes).
L7-N-R2000 User Manual

IPv6 in IPv4 Tunneling (Stateful)

55