Table of Contents
Advertisement
Section 3 - Configuration
Click Network Settings on the navigation menu to configure your local network settings.
When you are satisfied with your configuration, click Save Settings.
Enter the IP address of the router. The default IP address is 192.168.0.1.
Router IP Address:
If you change the IP address, once you click Save Settings, you will
need to enter the new IP address in your browser to get back into
the configuration utility.
Default Subnet
Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
Mask:
Host Name:
The default address to access the router's configuration is
http://dlinkrouter.local./ Here, you can replace dlinkrouter with a
name of your choice.
Local Domain
Enter the domain name (optional).
Name:
Enable DNS Relay:
Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use the router for a DNS
server.
Enable DHCP
Enable or disable the DHCP server.
Server:
DHCP IP Address
Enter the starting and ending IP addresses for the DHCP server's IP
Range:
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conflict.
D-Link DIR-819 User Manual
Network Settings
ROUTER SETTINGS
DHCP SERVER SETTINGS
DIR-819
NETWORK SETTINGS
NETWORK SETTINGS
NETWORK SETTINGS
Use this section to configure the internal network settings of your router and also to configure the built-in DHCP server to assign IP
addresses to computers on your network.The IP address that is configured here is the IP address that you use to access the Web-
based management interface.If you change the IP address in this section, you may need to adjust your PC's network settings to access
the network again.
Please note that this section is optional and you do not need to change any of the settings here to get your network up and running.
Save Settings
Don't Save Settings
ROUTER SETTINGS
Use this section to configure the internal network settings of your router.The IP address that is configured here is the IP address that
you use to access the Web-based management interface.If you change the IP address here, you may need to adjust your PC's network
settings to access the network again.
Router IP Address:
192.168.0.1
Default Subnet Mask :
255.255.255.0
Host Name :
dlinkrouter
Local Domain Name :
☑
Enable DNS Relay :
DHCP SERVER SETTINGS
Use this section to configure the built-in DHCP server to assign IP address to the computers on your network.
☑
Enable DHCP Server :
DHCP IP Address Range :
100
to
200
DHCP Lease Time :
10080
(minutes)
☐
(compatibility for some DHCP Clients)
Always broadcast :
ADD DHCP RESERVATION
☐
Enable :
Computer Name :
IP Address :
MAC Address :
Clone Your PC's MAC Address
Add / Update
DHCP RESERVATIONS LIST
Enable
Host Name
IP Address
NUMBER OF DYNAMIC DHCP CLIENTS
Host Name
IP Address
Save Settings
Don't Save Settings
SETUP
(optional)
(addresses within the LAN subnet)
<<
Computer Name
▼
Clear
MAC Address
Expired Time
54
Advertisement
Table of Contents
