Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
R A D I A N T
R A D I A N T
OPERATION, INSTALLATION AND MAINTENANCE MANUAL
OPERATION, INSTALLATION AND MAINTENANCE MANUAL
H E AT S T R I P
H E AT S T R I P
T h e h e a t e r t h a t i s a d e s i g n f e a t u r e !
T h e h e a t e r t h a t i s a d e s i g n f e a t u r e !
O U T D O O R
O U T D O O R
®
®
C l a s s i c ( T H H - A U L )
H E A T E R S
H E A T E R S
I n d o o r
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HEATSTRIP Classic THH1500AUL
Summary of Contents for HEATSTRIP Classic THH1500AUL
- Page 1 R A D I A N T O U T D O O R H E A T E R S R A D I A N T O U T D O O R H E A T E R S OPERATION, INSTALLATION AND MAINTENANCE MANUAL OPERATION, INSTALLATION AND MAINTENANCE MANUAL ®...
-
Page 2: Important Instructions
IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before installing or using this heater. This heater is hot when in use . To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, etc. -
Page 3: Installation
INSTALLATION 1. This equipment shall be installed only by qualified personal who are familiar with the construction and operation of the apparatus and hazard involved. 2. The heater is fitted with an electrical connection box and should be connected as a fixed installation by a licensed electrical professional in accordance with the relevant electrical code. -
Page 4: Product Overview
® spot heating in factories, warehouses and showrooms. Within your home, HEATSTRIP can provide comfort heating for undercover alfresco dining and BBQ area, patios, verandas, courtyards and balconies. - Page 5 Australian made ® Designed, engineered and assembled in Australia the HEATSTRIP ,is fully backed by a 12 month warranty. Stylish design— The Heater that is a Design Feature! ®...
- Page 6 MAXIMUM 117” (3.0 m) For higher ceiling heights, units can be lowered using optional bracket kits or refer to the Heatstrip Max range MOUNTING OPTIONS Suitable for ceiling, wall, beam, fixed umbrella and recess mounting. Also available for extension mount using rigid fixing poles and chain mount bracket.
-
Page 7: Spot Heating Principle
The top table shows a comparison between spot heating over a table, or heating an entire area. ® The bottom table shows the flexibility of using HEATSTRIP to provide a comfortable environment, even when the layout of the area is very unusual. -
Page 8: Radiant Footprint
O U T D O O R H E A T E R S Radiant footprint ® HEATSTRIP electric heater produce radiant heat, which heats objects rather than the air. Therefore, it is imperative that objects to be heated (ie. People), are within the direct radiant footprint of the heater. -
Page 9: Selection Guide
Classic model (in m2), based on 3 different scenarios. HEATSTRIP For example, for all outdoor area that is protected from prevailing winds by walls, café blinds etc, Model Heatstrip Mini will cover 32 ft2 and Model Heatstrip Regular will cover 52 ft2. - Page 10 ® Selections are based on HEATSTRIP Classic being mounted at 94” (2.4m) from the floor and an undercover fully en- closed outdoor area.
-
Page 11: Installation Requirements
For mounting heights more than 117” (3m,) we recommend the use of the optional accessories to reduce the height of the ®. heater to 82” to 105” (2.1 m to 2.7m.) This will increase the effectiveness of your HEATSTRIP Refer to the Mounting Accesory section for more information. -
Page 12: Installation Location
R A D I A N T O U T D O O R H E A T E R S Installation location —the below diagrams confirm the minimum recommended clearances. LIGHT, FAN OR SPRINKLER MUST NOT BE BELOW THE HEATER CEILING Wall 96"... -
Page 13: Mounting Options
H E A T E R S Mounting options ® The installation of HEATSTRIP Classic is simple and easy with the standard mounting brackets supplied. For other more challenging locations there are a range of mounting options available - refer to below diagrams. -
Page 14: Standard Mounting Bracket
H E A T E R S Standard mounting brackets ® The HEATSTRIP Classic comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling or wall mount, and come with preset angle options of parallel, 22.5° and 45°. -
Page 15: Flush Mount Enclosure
O U T D O O R H E A T E R S Flush Mount Enclosure ® The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP into a ceiling. They are available for ® all HEATSTRIP Classic models, and are supplied as a one-piece unit for mounting of heaters. -
Page 16: Twin Mounting Bracket
H E A T E R S Twin mounting bracket The optional Twin Mount bracket allows for two (2) units of HEATSTRIP Classic to be mounted side-by-side, either in parallel or angled as per the diagram on the right. This is ideal for applications when a wider heat coverage is required, or when there is mounting restrictions/limitations (such as running between 2 rows of tables etc.) -
Page 17: End To End Mounting Bracket
R A D I A N T O U T D O O R H E A T E R S End to end mounting bracket The end to end bracket allows multiple units to be joined in a straight line for maximum heat performance and aesthetic appeal. -
Page 18: Suspension Mount Bracket
Suspension mount bracket ® The Suspension Mount bracket provides a cheap, easy and effective option for lowering the HEATSTRIP Classic from high ceilings. If the ceiling height is more than 118” (3.0m) is an enclosed outdoor environment, or 105” (2.7m) in an exposed site, it is recommended to lower the heaters to an ideal mounting height of 90”... -
Page 19: Extension Mount Bracket
Extension Mount Bracket ® The Extension Mount bracket allows HEATSTRIP Classic units to be lowered from high ceilings, using rigid connections. The brackets are for use with 1” x 1” (25mm x 25mm x 1mm tube) (SHS), and can be supplied as brackets only for customising the length of the drop on site;... -
Page 20: Maintenance
Safety ® ® HEATSTRIP Classic has an IP rating of 55. This means it is safe for water ingress from all directions. The HEATSTRIP can be safely hosed down. ® HEATSTRIP has undergone extensive testing both in laboratory conditions; in Thermofilm’s manufacturing facility in Melbourne and field trials in Australia and overseas. - Page 21 R A D I A N T O U T D O O R H E A T E R S CHECK END SYMPTOM REASON CHECK TECHNICIAN USER Take photos of packag- Damaged during Inspect units for Return to retailer for repair/ Freight damage ing and unit and contact transport...
-
Page 22: Warranty Terms And Conditions
The below Warranty Terms and Conditions apply for International Customers. ® Thermofilm warrants to the original owner that HEATSTRIP Classic products will be free from defects in materials and workmanship for a period of 12 months from the date of purchase in accordance with the following warranty terms and conditions.
Need help?
Do you have a question about the Classic THH1500AUL and is the answer not in the manual?
Questions and answers