Table of Contents
Advertisement
3. Press the TUNE/SEL knob to select the
location. Enter a waypoint using any of
the methods used to enter a destination. See
"Enter Destination" listed previously in this
section for more information.
4. Once you have entered all desired waypoints
for the trip, press the Calc reconfigurable key.
Once the route is calculated, the route will
display and voice turn by turn guidance
will begin.
After the first waypoint, the color of the highlighted
route will change. See Colors on the Screen on
page 57 later in this section for more information.
Editing a Trip
While at the Trip Point screen, press the Edit
reconfigurable soft key. This screen allows you to
delete or move points in a trip.
To delete a waypoint, scroll to that waypoint and
press Delete.
54
To change the order of the waypoints, scroll to a
waypoint and press Move. Then, turn the
TUNE/SEL knob to move it to the desired location
within the list. Once the waypoint is at the
desired location, press the TUNE/SEL knob or the
OK key.
Plan a Route
After a destination has been entered, you must
press the Calc reconfigurable soft key. Once
the route is calculated, the route will display and
voice turn by turn guidance will begin to the
selected destination. While the system is planning
the route, the Route Option and Cancel keys
will be available. The Add Way Pt key will also
appear if there are less than 10 waypoints in
the current trip.
When your route guidance has been planned, it
will be highlighted and a checkered flag will appear
on the map to show your destination. Symbols
will also appear for any waypoints that have been
set, and "Route Calculation Completed" will
display.
Advertisement
Table of Contents
