Table of Contents
Advertisement
Vehicle Customization
Personalization
Your vehicle is equipped with personalization that
allows you to program certain features to a
preferred setting for up to two people. The number
of programmable features varies depending
upon which model of the vehicle is purchased.
On all vehicles, features such as climate control
settings, radio preset settings, exterior lighting
at unlock, remote lock and unlock confirmation,
and automatic door locks have already been
programmed for your convenience.
Some vehicles are equipped with additional
features that can be programmed including the
seat and outside rearview mirror position.
The navigation system screen preferences will
remain at the last set position.
If your vehicle is equipped with the ability to
program additional personalization features, the
driver's preferences are recalled by pressing
the unlock button on the remote keyless entry
transmitter, 1 or 2, or by pressing the appropriate
102
memory button, 1 or 2, located on the driver's
door. Certain features can be programmed not to
recall until the key is placed in the ignition. To
change feature preferences you must use one of
the following procedures.
Entering the Personalization Menu
To enter the feature programming mode, do the
following:
1. Turn the ignition on without the engine
running. Make sure an automatic transmission
is in PARK (P) or a manual transmission
has the parking brake set.
To avoid draining your vehicle's battery, make
sure that the headlamps are off. See
"Headlamps" in the Index of your vehicle's
owner manual.
2. If your vehicle has memory settings, press the
appropriate memory button, 1 or 2, located on
the driver's door armrest. The DIC display
will show either Driver 1 or 2 depending
on which button was selected.
Advertisement
Table of Contents
