Creating A Trip With Waypoints - Cadillac CTS 2007 User Manual

4. Use the TUNE/SEL knob to enter the street
name. Enter only the street name and not the
direction, for example, enter Civic Center
Dr, not N. Civic Center Dr. You may press the
List reconfigurable soft key at any time to
display a list of street names that match the
information that you have entered thus
far. The system will automatically display a list
of matching street names once there are
only a few matches remaining. Use the
TUNE/SEL knob to select the desired street
name. If the desired street name is not shown,
it is possible that the DVD map disc does
not contain this information. See Database
Coverage Explanations on page 61.
5. The system will display the possible address
numbers for the street that was selected. Use
the TUNE/SEL knob to enter the address
number for the address. If the address number
does not fall into the address number range
shown on the system, it is possible that
the DVD map disc does not contain this
information. See Database Coverage
Explanations on page 61.
6. Press the Calc reconfigurable soft key to
calculate a route to this destination. Any
current trip will be replaced with the new
address you just entered.
7. Press the Map reconfigurable soft key to see
a zoomed in map of the address you entered.
8. Press the Set Dest reconfigurable soft key to
add the address that you just entered to the
current list of waypoints as the last waypoint.

Creating a Trip with Waypoints

Once a destination has been entered, you can
add waypoints. Trip waypoints are destinations you
want to arrive at before reaching your final
destination. Up to 10 waypoints can be entered for
any trip.
To enter a waypoint, do the following:
1. Press the Trip Points reconfigurable soft key
on the Navigation Menu screen.
2. Turn the TUNE/SEL knob to scroll the trip
points list. A waypoint can be added at any
location designated by a blank flag.
53