Plan A Route; Traveling On A Planned Route - Cadillac CTS 2004 Manual

Plan a Route

After a destination has been entered, you must press
the Calculate multi-function button. The system will
return you to the map and will plan the route to
your selected destination. While the system is planning
the route, the Route Option and Cancel multi-function
buttons will be available. Also the Add Way Pt
multi-function button will appear if there are less than 10
waypoints in the current trip.
When your route guidance has been planned, it will be
highlighted and a checkered flag will appear on the
map to show your destination. Symbols will also appear
for any waypoints that have been set. The system
will display "Route Calculation Completed" at the bottom
of the screen.

Traveling on a Planned Route

After a route has been calculated and the route
highlighted, you may hear an audio prompt to proceed
to the highlighted route. When you are ready, drive
the vehicle to the highlighted route. Once you begin
driving on the route, the system will give additional audio
and visual prompts, as you approach your next
maneuver. Each maneuver is indicated on the map with
a red maneuver pin.
2-32
Maneuver Pins
Maneuver pins are red "stick pin" icons on the map that
indicate changes in the road or special action that
must be taken by the driver to remain on the currently
traveled road. For example, the road may have a
sharp curve in it. The curve would not qualify as an
official turn on the planned route. However, the driver
must be aware of the curve so that he or she can
stay on the planned route. Maneuver pins are always
displayed along a planned route, but voice prompts and
screen popups will only be given if these features are
turned on.