Cadillac CTS 2007 User Manual page 105

Before your vehicle was shipped from the factory,
it was programmed to Mode 2. The mode to
which the vehicle was programmed may have
been changed since it left the factory. To program
the vehicle to a different mode, do the following:
1. Enter the Personalization menu following
the instructions listed previously.
2. Scroll to Remote Keyless Options using the
TUNE/SEL knob.
3. Press the TUNE/SEL knob to view the modes.
4. Scroll to Remote Exit Recall and press the
knob once to select it.
When the mode is turned on, an X will appear
in the box.
This feature cannot be selected if Remote Recall
Memory/Recall Driving Positions is selected. If
it was previously selected, you must first de-select
it in order to be able to select Remote Exit
Recall.
The mode you selected is now set. You can either
exit the programming mode by following the
instructions later in this section or program the
next feature available on your vehicle.
Key in Recall Memory
If your vehicle has the optional memory package,
you will have this feature. When this feature is
turned on, you can recall any previously
programmed seat and mirror positions when the
key is inserted into the ignition. The following
modes are available for selection:
Mode 1: ON
Mode 2: OFF
Before your vehicle was shipped from the factory,
it was programmed to Mode 2. The mode to
which the vehicle was programmed may have
been changed since it left the factory. To program
the vehicle to a different mode, do the following:
1. Enter the Personalization menu following
the instructions listed previously.
2. Scroll to Remote Keyless Options using the
TUNE/SEL knob.
3. Press the TUNE/SEL knob to view the modes.
4. Scroll to Key In Recall Memory and press
the knob once to select it.
When the mode is turned on, an X will appear
in the box.
105