Cadillac CTS 2007 User Manual page 104

Recall Driving Positions
If your vehicle has the optional memory package,
you will have this feature. When this feature is
turned on, you can recall any previously
programmed seat and mirror controls when the
unlock button on the remote keyless entry
transmitter is pressed. The following modes are
available for selection:
Mode 1: ON
Mode 2: OFF
Before your vehicle was shipped from the factory,
it was programmed to Mode 2. The mode to
which the vehicle was programmed may have
been changed since it left the factory. To program
the vehicle to a different mode, do the following:
1. Enter the Personalization menu following
the instructions listed previously.
2. Scroll to Remote Keyless Options using the
TUNE/SEL knob.
3. Press the TUNE/SEL knob to view the modes.
4. Scroll to Recall Driving Positions and press
the knob once to select it.
When the mode is turned on, an X will appear
in the box.
104
This feature cannot be selected if Remote Exit
Recall or Key In Recall Memory is selected.
If either of these was previously selected, you must
first de-select it in order to be able to select
Remote Recall Memory/Recall Driving Positions.
The mode you selected is now set. You can either
exit the programming mode by following the
instructions later in this section or program the
next feature available on your vehicle.
Remote Exit Recall
If your vehicle has the optional memory package,
you will have this feature. When this feature is
turned on, you can recall any previously
programmed exit position for the driver's seat
when the unlock button on the remote keyless
entry transmitter is pressed. The following modes
are available for selection:
Mode 1: ON
Mode 2: OFF