AE Techron LVC608 Technical Manual page 4

LVC 608 200HF Supplemental Manual
The LVC608 200-HF has been modified to allow much higher frequencies than
would normally be available, because of this several changes have been made to
the input section.
The LVC 608-200HF differs from the standard LVC-608 in these ways:
1) The LVC 608-200HF has a specially optimized high frequency capable
input card. This input card differs from the standard LVC 608 input card in
the following ways:
a. Each channel will accept a balanced (or unbalanced) input on a
1/4-inch phone jack or a balanced three-pin female XLR on the
back panel, (these are wired in parallel for each channel).
b. It does not have voltage and current monitor outputs.
c. It supports only controlled voltage operation, controlled current
operation is not available.
2) Page 1-5, power chart does not apply.
3) Pages 1-10 to 1-13 and 1-15 to 1-16 do not apply to this model.
4) Parallel mono operation at high frequency is not recommended.
AE Techron 4-2006