PREPARATION
Installing / Removing the Antenna
Installing the Antenna:
■
Screw the antenna into the connector on the top of the
transceiver by holding the antenna at its base and turning
it clockwise until secure.
Removing the Antenna:
■
To remove it: Turn the antenna counterclockwise until
the antenna has been removed from the threads of the
transceiver.
Installing / Removing the Belt Clip
Installing the Belt Clip:
■
Place the belt clip to the grooves on the back of the
transceiver, and then install the screws, turning clockwise.
Removing the Belt Clip:
■
Remove the screws turning counterclockwise, allowing
you to remove the belt clip.
8
Professional
FM Transceiver