Installing / Removing The Antenna; Installing / Removing The Belt Clip - AnyTone AT-3318UV Instruction Manual

INSTALLATION & CONNECTION

Installing / Removing the Antenna

■ Installing the Antenna:
Screw the antenna into the connector on the top of
the transceiver by holding the antenna base and
turning it clockwise until secure.
■ Removing the Antenna:
Turn the antenna anticlockwise to remove it.

Installing / Removing the Belt Clip

■ Installing the Belt Clip:
Place the belt clip to the corresponding grooves
on the back of the transceiver, and then Clockwise
screw it.
■ Removing the Belt Clip:
Anticlockwise turn screws to remove the belt clip.
10