Advertisement
CONFIGURATION
It is possible to configure various parameters of the unit.
In OFF mode press for 10 seconds
menu. It is necessary to pass through five menus to exit the configuration. The
Menu number is displayed above in the right part of the display.
Menu 1: Adjusting the ECO set point temperature.
By default the Economic set point temperature value is equal to
comfort temperature value reduced by 3,5ºC.
The reduction value may be modified from 0 a 10ºC in 0,5°C steps.
For this purpose modify the value with the keys
and pass to the next setting.
ECO set point temperature value may be stored independently from the CONFORT
temperature value.
To authorize ECO value modification press and hold the
----
message "
and store pressing
In such a way when selecting the permanent economical mode it
will be possible to assign any temperature with
permanent economical mode.
Selection range will start from 4.5ºC to the comfort set point temperature.
Menu 2: Correction of temperature measures.
If there is a difference between an external thermometer indication and the temperature
displayed by the unit, in menu 2 it is possible to influence on the sensor in order to balance
the difference. (-5ºC to +5ºC,) in 0,1ºC steps.
"+"
To modify press the keys
next setting.
"
"
ON/OFF
key to enter the first configuration
"+"
"–"
/
"+"
"
"
OK
.
"+"
"–"
or
"–"
"
OK
or
, after press the
"
"
OK
and press
to store
key until it displays the
key displayed at selection of
"
key and proceed with the
9
c
PROG
>10 sec.
1
2
número
3
de menú
4
5
6
7
c
OK
1
2
3
4
5
6
7
OK
c
1
2
3
4
5
6
7
c
OK
Advertisement
