Ubiquiti airGrid M5 AGM5-HP-1724 Quick Start Manual page 7

6. Attach the airGrid to the pole.
Note:
Ø 1.25" - 2.2" pole.
a. Ensure that the cable opening of the Feed Support
faces down.
b. Insert each M6 U Bolt into each Pole Clamp and L Bracket.
c. Secure each M6 U Bolt with two M6 Serrated Flange Nuts.
d. Tighten all nuts to approximately 14 N-m (10 lb-ft) or less to
avoid deforming the pole.
The mounting assembly can accommodate a
Hardware Installation
5