Preparation For Network Connection (For Administrators); Checking A Lan Cable For Connection; Assigning An Ip Address - Develop ineo+ 3350 Quick Manual

4.1

Preparation for network connection (for administrators)

4 Initial Settings of This Machine
4.1 Preparation for network connection (for administrators)

Checking a LAN cable for connection

Check that a LAN cable connected to the network is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 2-4.

Assigning an IP address

If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-
dress.
In the Control Panel, select [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Setting] - [IPv4
Settings], then configure the following settings.
Settings
[IP Address]
[Subnet Mask]
[Default Gateway]
[IP Application Method
Auto Setting]
Tips
- If this machine's IP address is changed and the network settings are completed, this machine restarts.
- To check the IP address assigned to this machine, print out the Configuration Page. To print out the
Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Configuration
Page].
ineo+ 3350/3850
Description
When manually specifying the IP address, enter the fixed IP address assigned
to the machine.
When manually specifying the IP address, enter the subnet mask.
When manually specifying the IP address, enter the default gateway.
When automatically specifying the IP address, select the method for automatic
retrieval.
• [DHCP Settings]: [ON] is specified by default.
• [BOOTP Settings]: [OFF] is specified by default.
• [ARP/PING Settings]: [OFF] is specified by default.
• [AUTO IP Settings]: Fixed to [Enable].
4
4-3