Nilfisk-ALTO ATTIX 751-01/-11/-21 Repair Manual page 8

Nilfisk
Safety instructions
ALTO
For your own safety
E S D ( e l e c t r o s ta t i c
discharge)
Attix7_ver.1.0_140105
Repairs should only be
made by someone who
has received proper
instructions for the job
or who is a qualified elec-
trician.
Observe the following ESD precautions before any
repair of or near electronic parts:
• Touch the protective conductor to discharge your own
body.
• Possibly wear an anti-static wrist strap.
• Use a conducting floor or tabletop.
• Never touch a circuit board or electronic components,
always hold them by the plastic or insulation.
• Transport electronic parts in conductive packaging
(e.g. special ESD packages).
A
Observe national safety
directives and regulations
for the electrical enginee-
ring trade, in particular:
IEC 60335-2-69
EN 60335-2-69
DIN VDE 105 part 1:
operation of electrical
power installations
DIN VDE 0701/0702:
repair, modification and
testing of electrical instal-
lations
Before starting the equip-
ment, be sure to read the
accompanying service
manual, and keep it close
as ready reference.
The equipment should
only be used by persons
who have been instructed
in its use and are authori-
zed to do so.
8/59