Nilfisk-ALTO ATTIX 751-01/-11/-21 Repair Manual page 7

Nilfisk
ALTO
In this manual you will find
the essentials you need
to know when repairing
wet and dry cleaners of
the Attix 7 and 19 Gallon
series.
When carrying out re-
pairs, make sure you
have a suitable work-
bench or the like with the
necessary power supply
available.
If you determine an error
in operation, be sure to
refer the customer to the
user manual.
Symbols used to mark in-
structions
Attix7_ver.1.0_140105.
Preface
A fault in the equipment
can have a number of cau-
ses. Chapter E Trouble-
shooting will help you
here.
Use the illustrated spare
parts lists for your repairs.
These show you the locati-
on of the individual parts
and the sequence in which
they are assembled.
Read the technical infor-
mation sheets. These will
tell you about any techni-
cal modifications made
after publication of this
repair manual.
Technical information
sheets are a supplement
to the spare parts list until
a follow-on publication.
Repair manuals and tech-
nical information sheets
should be available at the
site where repairs are car-
ried out. Further repair
manuals of the Attix series
may be necessary for
repairs to the equipment.
It is not permitted to give
them to third parties.
Use original Nilfisk
ALTO spare parts only!
Safety instructions mar-
ked with this symbol in
this manual must be ob-
served to prevent danger
to persons.
This symbol is used to
mark safety instructions
that must be observed to
prevent damage to the
equipment and degradati-
on of performance.
This symbol indicates tips
and instructions to simpli-
fy work and to ensure safe
operation.
7/59