Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nilfisk-ALTO ATTIX 40-0M PC TYPE 22
Summary of Contents for Nilfisk-ALTO ATTIX 40-0M PC TYPE 22
-
Page 1: Operating Instructions
ATTIX 40-0M PC TYPE 22 Operating Instructions 107400339 A en... -
Page 3: Table Of Contents
ATTIX 40-0M PC TYPE 22 Contents english Important safety instructions ....................2 Description Operating elements ..............7 Operating panel ..............7 Before starting the Assembling the vacuum cleaner...........8 cleaner 3.1.1 Taking accessories out of the packaging ......8 3.1.2 Attaching the suction pipe holder to the suction pipe ..8... - Page 4 ATTIX 40-0M PC TYPE 22 1 Important safety instructions english Symbols used to mark Prior to using the appliance for the first time, be sure to read instructions this document through and keep it ready to hand. DANGER Danger that leads directly to serious or irreversible injuries, or even death.
- Page 5 The air flow in Safety Vacuum systems has to be strictly controlled to achieve a minimum flow rate of V = 20 m/s in the suction hose. The vacuum cleaner ATTIX 40-0M PC TYPE 22 is suitable for pick- ing up: • Non flammable liquids (flashpoint 55 °C or higher) •...
- Page 6 2. disposed of in a manner that complies with valid regulations for such waste removal. A dust test must be performed at least once every year by Nilfisk-Alto service or a trained person. This test includes, for example, whether there is damage to the filter, the vacuum cleaner is sealed to the air...
- Page 7 2. Regularly check whether the power cord is damaged or shows signs of ageing. 3. Have the faulty mains connecting lead replaced by your Nilfisk-Alto service representative or a qualified electri- cian prior to using the appliance again. DANGER The upper section of the vacuum cleaner contains live components.
- Page 8 The use of non-genuine spare parts and accessories can impair the safety of the appliance. 1. Only use spare parts and accessories from Nilfisk-Alto. 2. Use only the brushes supplied with the vacuum cleaner or specified in the operating manual.
-
Page 9: Operating Elements
ATTIX 40-0M PC TYPE 22 2 Description english 2.1 Operating elements Handle with receptacle for electrical lead Fixing point for suction pipe holder Retaining clamp Castor Dirt tank Inlet fitting Applicance switch Hose diameter setting Operating knob for filter cleaning 2.2... -
Page 10: Assembling The Vacuum Cleaner
ATTIX 40-0M PC TYPE 22 3 Before starting the cleaner english 3.1 Assembling the 1. Take vacuum cleaner and vacuum cleaner accessories out of the pack- 3.1.1 Taking accessories out aging. of the packaging 2. The mains plug should not yet be inserted into a sock- 3. Open the retaining clamps... -
Page 11: Insert The Disposal Bag
ATTIX 40-0M PC TYPE 22 english Before picking up dust with occupational exposure limit values: 1. Check that all the filters are present and properly fitted. 2. Do not use the cleaner with damaged or missing antistatic clamp. Risk of explosion due to static discharge in explosive atmos- pheres. -
Page 12: Inserting The Filter Bag
ATTIX 40-0M PC TYPE 22 english 3.4 Inserting the filter bag 1. The mains plug should not yet be inserted into a socket. 2. Open the retaining clamps (A) and remove the up- per section of the vacuum cleaner. 3. Insert the filter bag into the dirt tank. -
Page 13: Connections
ATTIX 40-0M PC TYPE 22 4 Control / Operation english 4.1 Connections 1. Connect the suction hose. 4.1.1 Connecting the suction hose 4.1.2 Electrical connection 1. Ensure that the cleaner is switched off. 2. Insert the power cord into a The operating voltage shown on the... -
Page 14: Check The Volume Flow Monitor
ATTIX 40-0M PC TYPE 22 english 4.3 Cleaning the filter element " Push&Clean System " Filter Cleaning System Only for vacuum cleaning without a filter bag and without a cloth insert filter. If suction performance drops: 3. Press the button to start filter 1. Turn switch to position "I"... -
Page 15: Techniques
The use of a seperate filter element or filter screen is recommend- If foam appears, stop work immediately and empty the tank. To reduce the amount of foam, use foam killer Nilfisk-ALTO Foam Stop (see section "Accessories" for order number). -
Page 16: Switching The Vacuum Cleaner Off And Storage
ATTIX 40-0M PC TYPE 22 6 After finishing work english 6.1 Switching the vacuum 1. After picking up hazardous cleaner off and storage dust, vacuum clean the out- side of the cleaner. 2. Switch off the cleaner and pull the mains plug out of the socket. 3. -
Page 17: Maintenance Plan
ATTIX 40-0M PC TYPE 22 7 Maintenance english 7.1 Maintenance plan After finishing work When required 7.2.1 Emptying dirt tank 7.2.2 Replacing the disposal bag 7.2.3 Replacing the filter bag 7.2.4 Replacing filter element (Push&Clean) 7.2.5 Replacing motor cooling filter 7.2 Maintenance work 1. Switch off the vacuum clean- 7.2.1 Emptying the dirt tank... -
Page 18: Replacing The Disposal Bag
ATTIX 40-0M PC TYPE 22 english 7.2.2 Replacing the disposal 1. Switch vacuum cleaner and pull the mains plug out of the socket. 2. Open retain- During the following work, en- ing clamps (A) and re- sure that dust is not unnecessarily move the upper section spread around. -
Page 19: Replacing The Filter Bag
ATTIX 40-0M PC TYPE 22 english 7.2.3 Replacing the filter bag 1. Switch off the vacuum clean- er and pull the mains plug out of the socket. During the following work, en- 2. Open the retaining clamps sure that dust is not unnecessarily (A) and remove the upper spread around. -
Page 20: Replacing Filter Element (Push & Clean System)
ATTIX 40-0M PC TYPE 22 english 7.2.4 Replacing filter element 1. Switch vacuum (Push & Clean System) cleaner and pull the mains plug out of the socket. 2. Open the retaining clamps During the following work, en- (A) and remove the up- sure that dust is not unnecessarily per section of the vacuum spread around. -
Page 21: Replacing The Motor Cooling Filter
ATTIX 40-0M PC TYPE 22 english 7.2.5 Replacing the motor 1. Remove filter cartridge. cooling filter During the following work, en- sure that dust is not unnecessarily spread around. Wear a P2 breath- ing mask. Never use the vacuum cleaner with- out a filter. - Page 22 ATTIX 40-0M PC TYPE 22 8 Troubleshooting english Fault Cause Remedy ‡ Motor does not start > Fuse of the mains socket has • Connect mains fuse blown > Overload protection switch • Switch off the vacuum cleaner has tripped and allow it to cool for approx.
-
Page 23: Recycling The Cleaner
ATTIX 40-0M PC TYPE 22 9 Further information english 9.1 Recycling the cleaner Make the old cleaner unusable immediately. 1. Unplug the cleaner. 2. Cut the power cord. 3. Do not discard of electrical appliances with household waste. As specified in European Directive 2002/96/EC on old elec- trical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. -
Page 24: Technical Data
ATTIX 40-0M PC TYPE 22 english 9.5 Technical data ATTIX 40-0M PC TYPE 22 - EU - Voltage Mains frequency Fuse Power consumption 1100 ATTIX 40-0M PC TYPE 22 Total connected load 1100 ³ Air flow rate l/min 3200 Vacuum Sound pressure level at a distance of 1 m, EN dB(A) 60704-1... - Page 28 E-mail: service@nilfisk-alto.dk Sd 14, Jalan KIP 11 www.nilfisk-alto.se www.nilfisk-alto.dk Taman Perindustrian KIP TAIWAN Sri Damansara Nilfisk-ALTO Food Division 52200 Kuala Lumpur Nilfisk-Advance Taiwan Branch Division of Nilfisk-Advance A/S Malaysia No. 5, Wan Fang Road Blytækkervej 2, Tel.: (+60) 3 603 6275 3120...
Need help?
Do you have a question about the ATTIX 40-0M PC TYPE 22 and is the answer not in the manual?
Questions and answers