Electrical; Removing/Fitting Electrical Components; Removing/Fitting Socket Attix 791-2M/B1 - Nilfisk-ALTO ATTIX 751-01/-11/-21 Repair Manual

Nilfisk
ALTO
7

Electrical

7.1 Removing / fitting
electrical components
The following repairs are identical as with other models.
751-01/-11/-21
751-2M/-0H
19 Gallon/-AE
751-61/-71
791-21
Attix
Removing /
7.2
fitting power
cord
Removing /
7.3
fitting power
cord
7.4 Removing/fitting
socket
Attix 791-2M/B1
Attix7_ver.1.0_140105
Troubleshooting
761-21XC
761-2MXC
763-21ED
763-2MED
19 Gal./AS/PE2
X
X
1. Use a screwdriver to
take off the cover frame
(1).
Following repairs or servi-
cing, perform a thorough
electrical check.
Caution!
Make sure the power plug
is pulled out while you are
carrying out repairs.
Caution!
Work with the appropriate
wiring diagram (see secti-
on H). It is helpful if you
make a sketch to clearly
show which cable (note
the color) matches which
terminal.
See section
"Troubleshooting"
Identical to Attix in repair manual
550-01 Attix 550/560
12 Gallon/- RDF page 45
560-21 Attix 550/560
12 Gallon/- RDFD page 45
Attix7 3623
2. Undo the six screws (2)
holding the cover with a
Phillips screwdriver, and
take off the cover.
E
Attix7 3624
35/59