Removing/Fitting Cooling Air Filter (Attix 791-2M/B1); Removing/Fitting Hood (Attix 791-2M/B1) - Nilfisk-ALTO ATTIX 751-01/-11/-21 Repair Manual

Nilfisk
ALTO

4.6 Removing/fitting cooling air filter (Attix 791-2M/B1)

4.7 Removing/fitting hood (Attix 791-2M/B1)

Attix7_ver.1.0_140105
Troubleshooting
1
Attix7 3612
3
3
Attix7 3616
Attix7 3625
E
1. Undo the screw (1) with
an Allen key (5 mm), and
take off the cover.
2. Pull off the filter insert
(2) forwards.
3. Undo the four screws
( 3 ) w i t h a P h i l l i p s
screwdriver, and take off
the filter case.
4. Fit in the reverse order.
1. Unscrew the cooling air
filter (see 4.6).
2. Unscrew the socket
(see 7.4).
3. Undo the two screws (3)
with an Allen key (5 mm),
and take off the grip.
4. Undo the four screws
(4) of the locking clamps
with a Phillips screwdriver,
and take off the hood.
5. Fit in the reverse order.
31/59