Nilfisk
ALTO
3
Trolley/container
3.1 Removing/fitting castors (all models except Attix 751-71)
3.2 Removing/fitting wheels (all models except Attix 751-71)
3.3 Removing/fitting feet (Attix 751-71)
Attix7_ver.1.0_140105
Troubleshooting
Attix7 3647
Attix7 3648
Attix7 3649
E
1. Use an Allen key (5 mm)
to undo the countersunk
head screw (1), and remo-
ve the castor.
2. Fit in the reverse order.
1. Lever off the wheel cap
(1) with a screwdriver, and
remove the wheel.
2. Fit in the reverse order.
1. Take the container out
of the base frame, and
raise the frame by laying
the handle on the floor.
2. Unscrew the nut (1),
and remove the foot with
the screw.
3. Fit in the reverse order.
25/59