Casio QT-6100 Service Manual page 69

Prompt message
E051 CHK/TBL No. is occu-
pied.
E052 CHK/TBL No. is Busy.
E053 CHK/TBL No. is not
opened.
E054 Out of CHK/TBL No.
Range.
E056 Store range full.
E057 No item exists in detail.
E058 Enter post entry item.
E059 Press Eat-in or Take-out
key.
**********
E060 Printer offline.
**********
E061 Printer error
**********
E061 Printer error.
YES:Retry to print.
NO :Backup to R/J printer.
ESC:Discard data.
**********
E062 Printer paper end.
**********
E062 Printer paper end.
YES:Retry to print.
NO :Backup to R/J printer.
ESC:Discard data.
E064 Printer buffer full.
YES:Retry to print.
NO :Backup to R/J printer.
ESC:Discard data.
**********
E070 Terminal out of action.
Cannot print.
**********
E071 Target terminal printer
BF full.
YES:Retry to print.
NO :Backup to R/J printer.
ESC:Discard data.
**********
E072 Target printer terminal is
busy.
Meaning
Attempt is made to use the <NEW
CHECK> key to open a new check us-
ing a number that is already used for an
existing check tracking memory.
Attempt to use the same check number
whilst the specified number is being
used in the other terminal.
Check number not found
Check number range over
All check number are occupied in range.
Round repeat cannot be found in detail.
Post entry item exists in detail.
Press eat-in or take-out key.
Printer offline. "****" means ECR logical
ID and printer number.
Printer downed. "****" means ECR logi-
cal ID and printer number.
Printer downed. "****" means ECR logi-
cal ID and printer number.
Paper near-end/end "****" means ECR
logical ID and printer number.
Paper near-end/end "****" means ECR
logical ID and printer number.
Print buffer full at sender side
Down at target ECR which has printer
"****" means ECR logical ID and printer
number.
Printer buffer full at target ECR which
has printer
"****" means ECR logical ID and printer
number.
Busy at target ECR which has printer
"****" means ECR logical ID and printer
number.
— 67 —
Action
Finalize and close the check that is currently
under the number that you want to use or
use a different check number.
Use another check number or close the
check at that terminal.
Use the correct check number (if you want
to reopen a check that already exists in
the check tracking memory) or use <NEW
CHECK> to open a new check.
Enter correct number.
Recall the stored data.
Enter Post entry item.
Press Eat-in or Takeout key.
The contents are printed on the backup
printer.
Follow the prompt message.
The contents are printed on the backup
printer.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.