Operation With Wire Remote Controller; Mode Function - Hisense AMD-09UX4SJD User Manual

2. Operation with wire remote controller

2. 1 Mode function

2.1.1 Press MODE button
cooling mode
dehumidification mode
fan mode
heating mode
auto-run mode
A
2.1.2 Press ON/OFF
2.1.3 Press TEMP. SETTING
range can be set from 18℃ to 32℃。
2.1.4 Press FAN button
unit will automatic select fan speed according to the difference between room temperature and
setting temperature
2.1.5 You may turn off the unit by press ON/OFF
Note:
1 .If your air conditioner is multi-type unit, the setting mode may interfere with outdoor mode. This is
because that all indoor units use one outdoor unit, outdoor unit can only run with same mode(cooling
or heating),so, when the mode you set is different from the mode that outdoor is running with, mode
interfere occurs. Following shows the mode interfere scene.
cooling
dry
heating
fan
outdoor unit always run with the mode of first indoor unit that turned on. when the setting mode of
following indoor unit is interfered with it, Three trickle would be heard, The wire remote controll
display 55 error, And the indoor unit interfered with the normal running units would turn off
automatically. It's normal and when you set right mode, the unit may work normally.
2 .For multi-type air-conditioner, the auto mode is invalid.
3 .In fan mode, temperature setting is invalid.
" "
to select operation mode:
( invalid for this model)
" "
button to turn on or turn off the unit
" ""
" "
to set fan speed you want. Of course you can set auto fan and indoor
cooling dry heating fan
√ √
×
√ √
×
√
× ×
√ √
×
remote controller operation manual
"
button to set room temperature. The temperature
" "
button again
√ √
normal
√
mode interfere
×
×
√
6