Audio And Video - D-Link DCS-5211L User Manual

Section 4 - Configuration
You may configure four video profiles with different settings for your camera. You may also set up different profiles for your computer and mobile
display. In addition, you may configure the audio (speakers and microphone) settings for your camera.
Video Profile: This section allows you to change the Encode Type, Resolution,
FPS, and Quality.
Encode Type:
The compression format used when viewing your camera.
Resolution: Select the desired video resolution from the drop-down menu.
The higher setting can obtain better quality. However, it will use
more resource within your network.
FPS: Select the optimal setting depending on your network status.
Please note that the higher setting can obtain better quality.
However, it will use more resources within your network.
bps: Select the bitrate to assign the video. This is a constant bitrate. A
higher bitrate will result in better looking video at the expense of
a larger file size.
Quality: Select one of five levels of image quality: Highest, High, Medium,
Low, and Lowest.
RTSP URL:
The URL used to connect to the camera when viewing from
QuickTime or a mobile device.
Day/Night
Allows you to control the IR LEDs on the front of the camera. Note
Mode:
that when this option is enabled, live feed video will be in black
and white, and ICR filter will be activated.
Audio Setup:
Allows you to enable or disable and adjust the volume level of the
speaker and microphone. If you select speaker, you must attach
external speakers to the audio port on the camera.
Note: Video Profile 3 is always set to MJPEG as the Encode Type to ensure that at least one of the Video Profiles are viewable by non-IE browsers. Video
Profile 4 is for mobile devices only, and always uses MPEG-4 as the Encode Type.
D-Link DCS-5211L/DCS-5222L User Manual

Audio and Video

34