Camera Control - D-Link DCS-5211L User Manual

Section 4 - Configuration
Select the Preset Position from the drop-down menu to access settings that affect how the Internet Camera can pan and move to preset
locations.
Set As Home: Click to set the current position as Home.
Default Home: Click to set the Home position with the default
setting.
Pan Step:
Select the speed at which the camera will pan for
a full cycle from the drop-down list. Select a value
between 0 and 10, 0 being the slowest setting.
Tilt Step:
Select the speed at which the camera will tilt for a
full cycle from the drop-down menu. Select a value
between 0 and 10, 0 being the slowest.
Preset Name:
Enter a name for your camera location and click
Present Add.
Position:
Select created presets from the drop-down menu.
Patrol Selection: If you want to delete an entry, select it and then
click Delete.
To use the Auto Patrol feature, select the desired
preset positions from the Preset Locations list and
add them to the Patrol Positions list by clicking
Select. You can then select the order in which the
camera will patrol through the preset locations by
selecting a location and clicking Up or Down. Click
Remove to remove a location from the list. Click
Save when finished.
D-Link DCS-5211L/DCS-5222L User Manual

Camera Control

42