Live Video - D-Link DCS-4701E User Manual

Section 3: Configuration
This section shows your camera's live video. You may select any of the available icons listed below to operate the camera. You may also select your
language using the drop-down menu on the left side of the screen.
If your view window area is less than your frame size, you can click and drag on the live video to move the camera view around. Refer to "Video
Stream" on page 37.
Clicking this will take you to the camera configuration pages.
Setup
Clicking this will allow you to add and remove icons from the
toolbar. This lets you create a custom toolbar with only the
Edit Toolbar
options you want.
You can choose between various screen sizes for your camera's
video:
ƒ Auto Screen: Automatically resize the camera video to
Window Size
ƒ Full Screen: View your camera video using the entire screen
ƒ 100% Screen: View your camera's video at 100% size
ƒ 50% Screen: View your camera's video at 50% size
ƒ 25% Screen: View your camera's video at 25% size
Select a video profile to use. For more on setting up your video
Video Profile 1/2
profiles, refer to "Video Stream" on page 37.
This will save a snapshot to your PC using the storage folder you
Take a Snapshot
have selected.
This will start recording a video clip to your PC using the storage
Record a Video
folder you have selected. Click it again to stop recording. If you
Clip
close the browser window, the recording will stop.
Select a storage folder to save snapshots and video clips to.
Set a Storage
Folder
Click this and use the slider to zoom in and out of your camera's
Zoom In/Out
video.
D-Link DCS-4701E User Manual
match your browser window

Live Video

19