Setting Up A Wireless Connection With Wps - D-Link DCS-5211L User Manual

Section 2 - Installation

Setting up a Wireless Connection with WPS

If your wireless access point or router supports push-button wireless protected setup (WPS), it is possible to quickly
configure the wireless network and DCS-5222L camera without using the camera's web interface.
After plugging the power adapter to your camera and the front status LED lights up, hold down the WPS button next to
the Micro SD card slot for 3 seconds.
Now press the WPS button on your router or access point within 1 minute to activate WPS and allow your devices to
automatically configure a wireless connections.
Note: On some network routers/access points, WPS may need to be activated via the device setup or web-interface.
Consult your product's user manual for further assistance.
WPS Button
D-Link DCS-5211L/DCS-5222L User Manual 13