Section 4 - Configuration
This section allows you to configure the DDNS setting for your camera. DDNS will allow all users to access your camera using a domain name instead
of an IP address.
DDNS:
Click to enable the DDNS function.
Server Address:
Select your Dynamic DNS Server from the drop-down
menu.
Host Name:
Enter the host name of the DDNS server.
User Name:
Enter your username or e-mail address used to connect
to the DDNS.
Password:
Enter your password used to connect to the DDNS
server.
Confirm Password:
Enter your password again for verification.
Timeout:
You can setup how often the camera notifies the DDNS
server of its current global IP address by entering a
whole number in hours.
Status:
Displays the connection status of your DDNS account.
D-Link DCS-5211L/DCS-5222L User Manual
Dynamic DNS
32