Spring Loaded Pin Adjustment; Cable Adjustment Required - TuffStuff AXT-2.5 Assembly Instructions Manual

Step 17a Spring Loaded Pin Adjustment
IMPORTANT
To insure proper operation of the Adjustable Press Bar, the spring loaded pin cable must be adjusted.
Use the guidelines below to make this adjustment.
DO NOT USE THIS GYM UNTIL THE CABLE HAS BEEN ADJUSTED
Split Washer
Jam Nut
Hex Tap Bolt
FIG. 1 Before inserting the Cable Assembly into
the Barrel Housing make sure the Jam Nut and the
Retaining Nut are not touching.
Hex Tap Bolt
FIG. 3 Adjust the Hex Tap Bolt so that the Plunger
is fl ush with the outside surface of the Adjustment
Plate.
24

CABLE ADJUSTMENT REQUIRED

Spring
Plunger
Retaining Nut
Adjustment Plate
Barrel Housing
Plunger
FIG. 2 Insert the Plunger into the Barrel housing
making sure that the end of the Plunger is seated in
one of the holes in the Adjustment Plate. Now tighten
the Retaining Nut with an adjustable wrench. (Do not
allow the Cable Assembly to turn or become jammed
while tightening the Retaining Nut).
Retaining Nut
Jam Nut
FIG. 4 Now tighten the Jam Nut against the Retain-
ing Nut using an adjustable wrench.
the Cable Assembly to turn or become jammed while
tightening the Jam Nut).
AXT-2.5 AXT- Cable Motion Plus Home Gym
.
Adjustment Plate
Plunger
(Do not allow