Service Mode; Outline; Using The Service Mode; Viii. Service Mode - Canon NP6320 Service Manual

CHAPTER 10 TROUBLESHOOTING

VIII. SERVICE MODE

A.

Outline

The NP6320's service mode allows the following:
• checking the operation of some switches and LEDs
• changing data in EEPROM.
B.

Using the Service Mode

1) Detach the VR cover from the rear of the left cover.
2) Check that the Copy Start key is glowing green.
3) Press the service switch (SW300) on the DC controller PCB.
4) Check that 'C00' is indicated.
5) Enter the No. of the desired service mode using the numeric keypad on the control panel.
• For example, the display indicates 'C03' in response to a press on '3'.
6) Press the Sort/Group key.
7) Operate as follows as necessary:
<Mode Nos. C00, C09, C10, C11, C12, C13, C14 and C20>
A press on the Sort/Group key executes the selected mode; a second press stops the execution.
<Mode Nos. C01 through C08 and, C15, C17 and C19>
Change the setting using the numeric keypad, and press the Sort/Group key; the setting will be
stored in EEPROM.
<Mode No. C18>
Press the AE key twice, and check 'CEE' is indicated on the control panel; then, press the Sort/
Group key.
8) Press the service switch (SW300) to leave the service mode.
10-66
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
COPYRIGHT © 1999 CANON INC. CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)