Mounting The Drum - Canon NP6320 Service Manual

B.

Mounting the Drum

The photosensitive drum is susceptable to light; if exposed to room light, it can cause white
spots or black lines on the copy images. As such, be quick in performing the following work.
Step
1 Take out the drum unit from the box, and
remove the light-blocking sheet.
2 Set the drum unit in the copier, and fix it in
place using the knob that held the dummy
drum.
3 Move the grip to clean the corona wire of the
drum unit two to three times.
4 Set the developing assembly in the copier,
and engage it.
COPYRIGHT © 1999 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Work
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
Remarks
Drum unit
Light-blocking
sheet
Take care not to damage the drum.
Slide the drum unit straight along the rails
into the copier.
The front cover may be left open.
8-5