Canon NP6320 Service Manual page 21

3. Cleaning the Corona Assembly
1) Grip the handles on both sides of the front door, and open the front door.
3-1. Cleaning Using the Corona Assembly Cleaner
1) Grip the tab on the end of the corona assembly cleaner, and slide the corona assembly cleaner
out toward you. Then, slide the corona assembly cleaner back into the copier.
Repeat this motion several times.
When you finish, slide the corona assembly cleaner back into the copier to its original position.
3-2. Cleaning the Static Eliminator
1) Turn the transport area release lever (green) to the left. Push slightly downward on the end of
the static eliminator, and slide it out of the copier.
2) After removing the static eliminator, turn it so that the bottom is facing upward. Slide the gray
tab on the bottom of the static eliminator back and forth from one end to the other several times.
3) When you finish, insert the static eliminator back into the copier, and return it to its original
position.
4) Return the transport area release lever to its original position. Close the front door.
COPYRIGHT © 1999 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
1-11