Canon NP6320 Service Manual page 55

1. Detaching the Lens Cable
1) Detach the copyboard cover, copyboard
glass, lens cover, rear cover, and upper
rear cover.
2) Remove the three screws [1] shown in
Figure 3-402, and detach the upper frame.
3) Mark the position of the pulley mount and
the cable mount using a scriber; see Fig-
ure 3-401.
4) Remove the two screws [2] that hold the
pulley mount [3] in place; see Figure 3-
403.
5) Detach the cable (cable mount).
2. Routing the Lens Cable
1) Remove the two screws that hold the lens
pulley fixing plate in place, and detach the
lens pulley; see Figure 3-401.
2) Wind the lens cable around the lens pulley
as shown in Figure 3-401; then, fix it us-
ing two screws.
3) Shift the pulley mount to the position
marked with a scriber, and fix it in place
using two screws.
COPYRIGHT © 1999 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
[1]
Figure 3-402
[2]
[3]
Figure 3-403
3-15