Dell 5330dn Service Manual page 29

2.2.1.3.4 Power Save Mode
The Power Save mode allows your printer to reduce power consumption when it is not in actual use. You
can turn this mode on by selecting the length of time for which the printer waits after a job is printed before it
switches to a reduced power state.
1. Press Menu (
2. Press Scroll (
3. Press Scroll (
4. Press Scroll (
5. Press Scroll(
The available options are 5, 10, 15, 30, 60 and 120(minutes).
6. Press Select (
7. Press Cancel (
2.2.1.3.5 Changing the font setting
Your machine has preset the font for your region or country. If you want to change the font which you prefer
or set the font under special condition such as the DOS environment, you can change the font setting as
follows:
1. Press Menu (
2. Press Scroll (
3. Press Scroll (
4. Press Scroll (
5. Press Scroll (
6. Press Select (
7. Press Cancel (
NOTE: Following information shows the proper font list for corresponding languages.
Russian: CP868, Cyrillic
Hebrew: 15Q, 8H, 0H (Israel only)
Greek: GREEK, PC737
Arabic & Farsi: ARABIC8, WINARABIC, PC864, FARSI, ISOARABIC.
Service Manual
Product spec and feature
).
to ) to highlight Settings and press Select (
to ) to highlight Setup and press Select (
to ) to highlight Power Save and press Select (
to ) to display the time settings you want.
) to save the selection.
) to return to Standby mode.
).
to ) to highlight Emulation and press Select (
to ) to highlight Setup and press Select (
to ) to highlight PCL and press Select (
to ) to access the required value.
) to save the selection.
) to return to Standby mode.
).
2-18
).
).
).
).
).