Installing Accessories; Precautions When Installing Printer Accessories; Installing Printer Memory - Dell 5330dn Service Manual

Reference Information

7.5 Installing Accessories

7.5.1 Precautions When Installing Printer Accessories

Never remove the control board cover while the printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing
ANY internal or external printer option.
The control board and internal accessories (wireless network interface card, DIMM, and hard disk) are
sensitive to static electricity. Before installing or removing internal accessories, discharge static electricity
from your body by touching something metal, such as the metal back plate on any device plugged into a
grounded power source. If you walk around before finishing installation, discharge any static electricity once
again.

7.5.2 Installing Printer Memory

Additional printer memory is provided on a Dual In-line Memory Module (DIMM).
The Dell 5330dn Mono Laser Printer has 256 MB of memory. It can be expanded to 768 MB.
NOTE: Your printer supports only Dell DIMMs. Order Dell DIMMs online at www.dell.com.
1. Power the printer off and unplug all cables from 3. Remove a new memory DIMM from its antistatic
the printer. package.
2. Grasp the control board cover and remove it.
7-6
Service Manual