Dell 5330dn Service Manual page 187

4. Locate the extra DIMM slot and align the notch
on the DIMM with the groove at the DIMM slot,
holding the DIMM by its edges.
5. Push the DIMM into the printer until it snaps
into place. Ensure that the latches fit over the
notches located on either side of the DIMM.
6. Close the control board cover by aligning the
groove on it with the notch on the printer and
sliding it.
7. Reconnect the power cord and printer cable, and
turn the printer on.
Service Manual
Reference Information
7-7