Setting Character Attributes; Setting Character Attributes By Label; Setting 自動縮小設定 - Brother P-touch E300 User Manual

Setting Character Attributes by Label

Using the 字形 key, you can select a 英字形 and apply 字大小 , 字寬 , 字體 , 底線 , and 對齊
attributes. Selectable "Character Attribute" options are listed in the Appendix. (See page 53.)
1
Press the 字形 key.
The current settings are displayed.
2
Select an attribute using the
the or key.
3
Press the 執行 or 段落更換 key to apply the settings.
New settings are NOT applied if you do not press the 執行 or 段落更換 key.
• Press the 取消 key to return to the previous step.
• Press the 空格 / 轉換 key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.
• Small characters may be difficult to read when certain styles are applied.
• Depends on the labelling application type, you cannot change the value in 字形 setting. In that
case, is displayed on the preview in the right side of the screen.
Setting 自動縮小設定
When " 字大小 " is set to " 自動 " and "Length" is set to a specific length, you can select the
way of reducing the text size to fit within the label length.
When " 等比例縮小 " is selected, the total text size is modified to fit within the label.
When " 字寬優先縮小 " is selected, the text width will be reduced to the size of x 1/2 setting.
(If further size reduction is required to fit the text into the selected label length, the total text
size will be modified after reducing the text width to x 1/2 setting.)
1
Press the 設定 key to display the Setup menu, Select " 自動縮小設定 " using the
key, and then press the 執行 or 段落更換 key. The 自動縮小設定 screen is displayed.
2
Select the style using the
3
Press the 執行 or 段落更換 key to apply the setting.
• Press the 取消 key to return to the previous step.
• Press the 空格 / 轉換 key to set the style to the default setting (" 等比例縮小 ").

Setting Character Attributes

or key, and then set a value for that attribute using
or key.
or
Setting Character Attributes
1
2
3
4
5
6
7
8
9
37