Selecting How Tape Is Fed And Cut - Brother P-touch E300 User Manual

EDITING A LABEL
• When using 熱縮套管 , set labelling application type to "Cable Wrap" and select " 熱縮套管 ".
In this case, cut option if fixed to " 不裁切 ". After printing, remove the 熱縮套管 cassette from
the labelling system and use scissors to cut the tape.
• After printing, remove the Fabric Iron On tape cassette from the labelling system and use
scissors to cut the tape.

Selecting how tape is fed and cut

When printing, the message " 裁切並繼續 " is displayed and goes into [cut pause mode].
Pressing the Tape cutter lever, you can cut the tape at the position you set in " 兩端空白 ".
The details are as follows.
• : Stop here and goes into [cut pause mode].
• : Stop here and finish printing.
• : Stop here and goes into [tape feed mode].
When the cut option is set to No Cut or Chain, it stops in the middle of printing area after the last
label is printed. After " 要送帶嗎 ?" is displayed, press 執行 to feed tape. Press 取消 to return to
the entering text mode.
40
Setting 兩端空白
小
大
省帶
不裁切