Battery - Brother P-touch E300 User Manual

Battery

1
After making sure that the power is off, remove the
rear cover on the back of the labelling system. If the
batteries are already in the labelling system,
remove them.
Make sure that the power is turned off when
replacing batteries.
2
Insert six new AA-size alkaline batteries (LR6),
or fully charged Ni-MH rechargeable batteries
(HR6), making sure that the positive (+) and
negative (-) ends of the batteries match the
positive (+) and negative (-) marks inside the
battery compartment.
Users of alkaline batteries
23
Always replace all six batteries at the same
time using brand new ones.
Users of Ni-MH rechargeable batteries
Always replace all six batteries at the same
time with fully charged ones.
Visit us at http://support.brother.com for the
latest information about recommended
batteries.
3
Attach the rear cover by inserting the three hooks
at the bottom into the slots on the labelling system,
then pushing down firmly until it snaps into place.
Remove the batteries if you do not intend to use the P-touch for an extended period of time.
1
2
3
4
5
6
7
8
9
21
Power Supply